// T.ONE

HARDWARE

Set up your gig in no time with the first

FULLy WIRELESS MIXER

NOT JUST A CABLE REPLACEMENT, BUT A MIXER REPLACEMENT THAT MEETS YOUR NEEDS.

One link setup

Mixer setup

Monitoring setup

Full mixer setup

FROM YOUR HOME TO THE STAGE, YOUR SETUP HAS NEVER BEEN SO FAST AND SO LIGHT.​

Weighing less than 120 grams and a volume of less than 0.1L, the T.ONE will follow you anywhere. 

Moving your setup from one place to another is now easier than ever, thanks to our completely wireless installation and the ability to save presets directly within the app.

MIX 8 CHANNELS, RIGHT FROM YOUR PHONE

Through the MYXIT application, configure the preamplifier gains of your T.ONE transmitter, define the mix of your T.ONE receiver and that’s it.

All configurations made in the application are sent to the T.ONE which transmits and calculates the streams independently, all with a latency of less than 2ms.

HEAR YOURSELF

With an additional receiver for each band member, each musician can connect their smartphone to their receiver and directly set up their personal monitoring mix. 

In addition, a crossfader allows you to quickly adjust your instrument in relation to the other band members. 

EXTEND YOUR T.ONE WITH YOUR BAND MATES ​

Equip each member of your band with their own T.ONE, this creates a virtual mixer and allows the configuration of personal monitoring or full control for the front-of-house.

What type of musician are you? Click to find out what we have for you.

Logo_favicon

As a Singer

CRYSTAL CLEAR MONITORING​

With a latency of less than 2ms between your microphone and your ears, forget any comb filter effect and find your voice as it is.


We recommend a set consisting of a T.ONE XLR female transmitter for your microphone (48V phantom compatible) and a T.ONE mini-jack receiver for your monitoring.

As a guitarist

Move around with a range of up to 30 meters on stage. Enjoy perfect audio signal retransmission and a guitar-specific analog interface.

We recommend a combination of a T.ONE ¼” jack transmitter for your guitar (Hi-Z compatible) and a T.ONE mini-jack receiver for your monitor. If you are using a pedal or amp, we recommend an additional pair of T.ONEs.

As a drummer

Whether you use mics for your acoustic drums or a cable for your electrics, we have what you need.

We recommend a set consisting of a 1/4″ T.ONE Jack transmitter for your electric drum kit (Hi-Z compatible) and a T.ONE mini-jack receiver for your monitoring. If you have an acoustic drum kit with mics, we also recommend a T.One 1/4″ Jack transmitter that will go from your mixer.

 

As a keyboard player

With your T.One XLR transmitter and receivers for your audio outputs and in-ear, you can finally concentrate on your music and say goodbye to complicated setups. Easy, right?

We recommend a set consisting of a T.ONE Jack 1/4″ transmitter for your keyboard (Hi-Z compatible) and a T.ONE mini-jack receiver for your monitoring.

As a sound engineer

Let the group take care of their monitoring and focus on the FOH (front of the house).
Take advantage of a light and fast equipment to install on your way. Check out our range of T.ONEs that will meet your needs.

THE COMBINATION OF RELIABLE TECHNOLOGY, UNMATCHED PERFORMANCE AND PATENT PENDING INNOVATION

WIRELESS EXPERIENCE

Proprietary radio protocol: 5.8 GHz ISM band

XTrue Diversity (2X2 MIMO)

Up to 10 simultaneous transmitters in one RF channel

FREEDOM OF MOVEMENT

2 milliseconds of wireless audio latency

Wireless range: up to 30 meters

 

LONG-LASTING

Battery life: up to 8 hours

Battery charging: 2 hours via USB-C cable

RELIABLE IN ANY ENVIRONMENT

Dust resistant

Water resistant


EXTENSIVE CONNECTIVITY

1/4″ & 1/8″ Jack & XLR (as transmitter)

1/4″ Jack & XLR (as receiver)

48 V phantom power on XLR transmitter


CRYSTAL CLEAR SOUND

Proprietary audio codec

Audio quality: 48 kHz / 24 bits

Audio bandwidth: 20 – 20 kHz


NOW IT'S UP TO YOU

BUY YOUR T.ONE

BE ONE OF THE FIRST

TO GET THE T.ONE

We'll let you know when available. It's soon.